Search
BY STANDARD
Due to the complexity and the large number of tests and domains in which we operate, we offer you three different search options to give you an idea of our extensive testing capabilities. Here you can either type in a standard reference.
If you should not find what you are looking for, don’t hesitate to contact us. After all, this extensive list turns incomplete as standards and markets evolve. Moreover we can probably adapt our equipment to suit your needs. In any case, we will be happy to work with you on a test program tailored to your needs.
For any inquiry, please contact us.
A test is always performed according to a certain technical regulation. Often this is an (inter)national standard. When it comes to standardization, we need to distinguish between product standards and test standards. A product standard is a set of specifications that a product must comply with. While a test standard describes the equipment and methodology to perform a certain test.
Becetel is an accredited test lab for a large number of these test standards.
The easiest way to find a standard or technical regulation is to type in the number below (without EN, ISO etc).
The search function indicates whether a test standard is accredited or not. The full list of our scope of accredited tests can be found on our download page.
| Reference | Title | Accreditation |
|---|---|---|
| ASTM D 1525 | Standard Test Method for Vicat Softening Temperature of Plastics | Yes |
| ASTM D 1598 | Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure | Yes |
| ASTM D 1621 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics | - |
| ASTM D 1693 | Standard Test Method for Environmental Stress-cracking of Ethylene Plastics | - |
| ASTM D 256 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics | - |
| ASTM D 638 | Standard Test Method for Tensile Properties of Plastics | Yes |
| ASTM D 648 | Deflection temperature of plastics under flexural load in the edgewise position | - |
| ASTM D 696 | Standard test method for Coefficient of linear Thermal expansion of Plastics | - |
| ASTM D4894 §10.7 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials - §10.7 Tensile properties | N/A |
| ASTM D4895 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion | N/A |
| BUtgb goedkeuringsrichtlijn | Toezichtkamers in kunststof | - |
| BUtgb goedkeuringsrichtlijn | Drukleidingsystemen in kunststof | - |
| DIN 16892 | Crosslinked polyethylene (PE-X) pipes - General quality requirements; testing | N/A |
| DIN 16892 | Crosslinked polyethylene (PE-X) pipes - General quality requirements; testing | Yes |
| DIN 53381 | Testng of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods | - |
| DIN 53505 | Shore A and Shore D hardness testing of rubber | Yes |
| DIN 53752 | Prüfung von kunststoffen - Bestimmung des thermischen Längenausdehnungskoeffizienten | - |
| DIN 8075 | Polyethylene (PE) pipes - PE 80; PE 100 - General quality requirements; testing | N/A |
| DIN 8075 | Polyethylene (PE) pipes - PE 80; PE 100 - General quality requirements; testing | Yes |
| DIN 8078 | Polypropylene (PP) pipes - PP-H; PP-B; PP-R; PP-RCT - General quality requirements and testing | N/A |
| DIN CERTCO ZP 14.3.1 G / TW / AW / DA | Zertifizierungsprogramm Kunststoffrohrsysteme (Druckrohre und -formstücke) | N/A |
| DVGW GW335-A2 | Plastics piping systems for the supply of gaseous fuels - Requirements and testing - Part A2: PE 80 and PE 100 pipes | N/A |
| DVGW GW335-A2 | Plastics piping systems for the supply of gaseous fuels - Requirements and testing - Part A2: PE 80 and PE 100 pipes | Yes |
| DVGW GW335-A2 / -B2 / -B2-B1 | Plastics piping systems for the supply of gaseous fuels - Requirements and testing - Part A2: PE 80 and PE 100 pipes | N/A |
| DVGW GW335-B2 / -B2-B1 | Plastics piping systems for the supply of gaseous fuels - Requirements and testing - Part B2: PE 80 and PE 100 fittings | N/A |
| DVGW GW355-B2 / -B2-B1 | Plastics piping systems for the supply of gaseous fuels - Requirements and testing - Part B2: PE 80 and PE 100 fittings | N/A |
| DVGW W320 | Manufacture; quality assurance and testing of pipes of PVC rigid (polyvinyl chloride rigid); HDPE (polyethylene rigid) and LDPE (polyethylene soft) for water supply and requirements on pipe couplings and pipeline parts | N/A |
| DVGW W534 (P) | Pipe connectors and pipe joints indrinking water installation | N/A |
| DVGW W544 | Plastic pipes in the drinking water installation - Requirements and testing | N/A |
| DVGW W544 | Plastic pipes in the drinking water installation - Requirements and testing | Yes |
| EN 12118 | Plastics piping systems - Determination of moisture content in thermoplastics by coulometry | - |
| EN 1446 (1996) | Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility | Yes |
| EN 1555-1 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General § 5.2.3.2 resistance to gas condensate | Yes |
| EN 17150 | Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes | Yes |
| EN 17151 | Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes | Yes |
| EN 17152 | Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration; attenuation and storage systems | N/A |
| EN 1716 | Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance on an assembled tapping tee | - |
| EN 681-1 | Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber | N/A |
| EN 681-2 | Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers | N/A |
| EN ISO 3458 | Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure | Yes |
| EN ISO 3503 | Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending | Yes |
| Fluvius specification G003 | Technische specificatie GAS - PE hulpstukken voor ondergrondse leidingen voor aardgasdistributie | N/A |
| ISO 10319 | Geotextiles - Wide-width tensile test | - |
| ISO 10838-1/2/3 (2000) | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels | N/A |
| ISO 10838-1/2/3 §8.2; §9.2 (2000) | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels | Yes |
| ISO 10838-1/2/3-§8.3.1; §9.3.1 (2000) | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels | Yes |
| ISO 10933 (1997) | Polyethylene (PE) valves for gas distribution systems | Yes |
| ISO 11357-3 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization | - |
| ISO 11413 | Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting | Yes |
| ISO 11413 annex D | Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting - Annex D | - |
| ISO 11414 | Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/fitting test piece assemblies by butt fusion | - |
| ISO 12091 | Structured-wall thermoplastics pipes - Oven test | Yes |
| ISO 12176-1 | Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Butt fusion | - |
| ISO 13254 | Thermoplastics piping systems for non-pressure applications - Test method for watertightness | - |
| ISO 13255 | Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints | - |
| ISO 13480 | Polyethylene pipes - Resistance to slow crack growth - Cone test method | - |
| ISO 13924 | Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings; PE tapping tees and PE branch saddles | - |
| ISO 13951 | Plastics piping systems - Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading | Yes |
| ISO 13953 | Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint | Yes |
| ISO 13954 | Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm | Yes |
| ISO 13955 | Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies | Yes |
| ISO 13956 | Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test | Yes |
| ISO 13957 | Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance | - |
| ISO 16486-4 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves | N/A |
| ISO 16486-4 Annex A | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves - Annex A: Determination of leaktightness of seats and packing | Yes |
| ISO 16486-4 Annex B | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves - Annex B: Test method for leaktightness and ease of operation after tensile loading | Yes |
| ISO 16611 | Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions; requirements and tests | N/A |
| ISO 17885 | Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications | N/A |
| ISO 17885 | Plastics piping systems - Mechanical fittings for pressure piping systems - §9.3.3.3 & §9.3.3.4 | Yes |
| ISO 17885 - Annex G | Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications” §9.3.3.1; §9.3.3.6 + annex G (method B) + Amd. 2016 | Yes |
| ISO 17885-annex C-annex E | Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications” - Annex C and Annex E | Yes |
| ISO 1817 | Rubber; vulcanized or thermoplastic - Determination of the effect of liquids | - |
| ISO 182-3 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method | - |
| ISO 18373-1 | Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature | - |
| ISO 18373-2 | Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites | - |
| ISO 18488 | Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method | Yes |
| ISO 18553 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes; fittings and compounds | Yes |
| ISO 188 | Rubber; vulcanized or thermoplastic - Accelerated ageing and heat resistance tests | - |
| ISO 19899 | Plastics piping systems - Polyolefin pipes and mechanical fitting assemblies - Test method for resistance to end load (AREL test) | - |
| ISO 21751 | Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test | - |
| ISO 23529 | Rubber - General procedures for preparing and conditioning test pieces for physical test methods | - |
| ISO 37 | Rubber; vulcanized or thermoplastic - Determination of tensile stress-strain properties | - |
| ISO 4427 | Plastics piping systems for water supply; and for drainage and sewerage under pressure | N/A |
| ISO 4437 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) | N/A |
| ISO 4437-1 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General | Yes |
| ISO 4437-4 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves | N/A |
| ISO 4437-4 Annex A | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves - Annex A: Determination of leaktightness of seats and packing | Yes |
| ISO 4437-4 Annex B | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves - Annex B: Test method for leaktightness and ease of operation after tensile loading | Yes |
| ISO 48-1 | Rubber; vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance | - |
| ISO 48-2 | Rubber; vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD | - |
| ISO 62 | Plastics - Determination of water absorption | - |
| ISO 815-1 | Rubber; vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures | - |
| ISO 8233 | Thermoplastics valves - Torque - Test method | Yes |
| ISO 9854-1 | Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method | - |
| ISO 9854-2 | Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials | - |
| ISO/DIS 13952 | Butt-fused joints for polyethylene (PE) pipes - Test method for constant load tensile test in a tensio-active medium | - |
| NBN EN 10002-1 (2002) | Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature) | Yes |
| NBN EN 1053 | Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness | - |
| NBN EN 1054 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints | - |
| NBN EN 1055 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling | - |
| NBN EN 12061 (1999) | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content | Yes |
| NBN EN 12099 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content | Yes |
| NBN EN 12100 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports | Yes |
| NBN EN 12117 | Plastics piping systems - Fittings; valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships | - |
| NBN EN 12119 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling | Yes |
| NBN EN 12201 | Plastics piping systems for water supply; and for drainage and sewerage under pressure - Polyethylene (PE) | N/A |
| NBN EN 12201-4 Annex A | Plastics piping systems for water supply; and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4 : Valves - Annex A: Determination of the leaktightness of seat(s) and packing | Yes |
| NBN EN 12256 | Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings | - |
| NBN EN 12608 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification; requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces | N/A |
| NBN EN 12666 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) | N/A |
| NBN EN 1277 (2004) | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints | Yes |
| NBN EN 12814-4 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test | Yes |
| NBN EN 13244 (2002) | Plastics piping systems for buried and above-ground pressure systems for water for general purposes; drainage and sewerage - Polyethylene (PE) | N/A |
| NBN EN 1329 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) | N/A |
| NBN EN 13341 | Thermoplastics static tanks for above ground storage of domestic heating oils; kerosene and diesel fuels - Blow moulded polyethylene; rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods | N/A |
| NBN EN 13476 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U); polypropylene (PP) and polyethylene (PE) | N/A |
| NBN EN 13598-1 Annex B.3.1 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly[vinyl chloride] [PVC-U); polypropylene [PP) and polyethylene (PE)-Part 1: Specifications for ancillary fittings and shallow chambers - Annex B.3.1 : Resistance to vertical load - pipe stop tes | Yes |
| NBN EN 1401 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) | N/A |
| NBN EN 1411 (1996) | Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method | Yes |
| NBN EN 1451 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) | N/A |
| NBN EN 1452 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) | N/A |
| NBN EN 1453 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) | N/A |
| NBN EN 1455 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) | N/A |
| NBN EN 1519 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) | N/A |
| NBN EN 1555 | Plastics piping systems for gaseous fuels supply - Polyethylene (PE) | N/A |
| NBN EN 1555-4 Annex A | Plastics piping systems for gaseous fuels supply - Polyethylene (PE) - Part 4 : Valves - Annex A : Determination of the leaktightness of seat(s) and packing | Yes |
| NBN EN 1555-4 Annex B | Plastics piping systems for gaseous fuels supply - Polyethylene (PE) - Part 4 : Valves - Annex B : Test method for leaktightness and ease of operation after tensile loading | Yes |
| NBN EN 1565 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) | N/A |
| NBN EN 1566 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) | N/A |
| NBN EN 1680 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms | Yes |
| NBN EN 1704 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending | Yes |
| NBN EN 1705 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow | Yes |
| NBN EN 1852 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) | N/A |
| NBN EN 28233 | Thermoplastics valves - Torque - Test method | Yes |
| NBN EN 477 | Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass | - |
| NBN EN 478 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method | Yes |
| NBN EN 479 | Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion | Yes |
| NBN EN 514 | Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints | - |
| NBN EN 580 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) | - |
| NBN EN 712 (1994) | Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force | Yes |
| NBN EN 727 (1994) | Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils | Yes |
| NBN EN 728 (1997) | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time | Yes |
| NBN EN 743 (1994) | Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion | Yes |
| NBN EN 744 (1995) | Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method | Yes |
| NBN EN 763 (1994) | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating | Yes |
| NBN EN 917 | Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness | Yes |
| NBN EN 921 (1995) | Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature | Yes |
| NBN EN ISO 10147 | Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content | Yes |
| NBN EN ISO 11173 | Thermoplastics pipes - Determination of resistance to external blows - Staircase method | Yes |
| NBN EN ISO 11296-4 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes | N/A |
| NBN EN ISO 1133-1 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method | Yes |
| NBN EN ISO 11357-6 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | Yes |
| NBN EN ISO 1167-1/2/3/4 | Thermoplastics pipes; fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure | Yes |
| NBN EN ISO 1172 | Textile-glass-reinforced plastics - Prepregs; moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods | - |
| NBN EN ISO 1183-1 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method; liquid pycnometer method and titration method | Yes |
| NBN EN ISO 12162 | Thermoplastics materials for pipes and fittings for pressure applications - Classification; designation and design coefficient | Yes |
| NBN EN ISO 13259 | Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints | Yes |
| NBN EN ISO 13263 | Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength | Yes |
| NBN EN ISO 13477 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) | Yes |
| NBN EN ISO 13478 | Thermoplastics pipes for de conveyance of fluids - Determination of the resistance to Rapid Crack Propagation (RCP) - Full-Scale Test (FST) | - |
| NBN EN ISO 13479 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes | Yes |
| NBN EN ISO 13846 | Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure | Yes |
| NBN EN ISO 13968 | Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility | Yes |
| NBN EN ISO 14125 | Fibre-reinforced plastic composites - Determination of flexural properties | Yes |
| NBN EN ISO 1452 | Plastics piping systems for water supply - Unplasticized | |
| poly(vinyl chloride) (PVC-U) | N/A | |
| NBN EN ISO 14632 | Extruded sheets of polyethylene (PE-HD) - Requirements and test methods | N/A |
| NBN EN ISO 15494 | Plastics piping systems for industrial applications - Polybutene (PB); polyethylene (PE); polyethylene of raised temperature resistance (PE-RT); crosslinked polyethylene (PE-X); polypropylene (PP) - Metric series for specifications for components and the system | N/A |
| NBN EN ISO 15874 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) | N/A |
| NBN EN ISO 15875 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) | N/A |
| NBN EN ISO 15876 | Plastics piping systems for hot and cold water installations - Polybutene (PB) | N/A |
| NBN EN ISO 15877 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) | N/A |
| NBN EN ISO 16486 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing | N/A |
| NBN EN ISO 17778 | Plastics piping systems - Fittings; valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships | - |
| NBN EN ISO 178 | Plastics - Determination of flexural properties | Yes |
| NBN EN ISO 179-1 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test | - |
| NBN EN ISO 179-2 | Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test | - |
| NBN EN ISO 180 | Plastics - Determination of Izod impact strength | - |
| NBN EN ISO 21003 | Multilayer piping systems for hot and cold water installations inside buildings | N/A |
| NBN EN ISO 22391 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) | N/A |
| NBN EN ISO 2505 | Thermoplastics pipes - Longitudinal reversion - Test method and parameters | Yes |
| NBN EN ISO 2507-1/2/3 | Thermoplastics pipes and fittings - Vicat softening temperature | Yes |
| NBN EN ISO 306 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) | Yes |
| NBN EN ISO 3126 | Plastics piping systems - Plastics components - Determination of dimensions | Yes |
| NBN EN ISO 3127 | Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method | Yes |
| NBN EN ISO 3451-4 | Plastics - Determination of ash - Part 4: Polyamides | - |
| NBN EN ISO 3451-5 | Plastics - Determination of ash - Part 5: Poly(vinyl chloride) | - |
| NBN EN ISO 3458 | Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure | - |
| NBN EN ISO 3501 | Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force | Yes |
| NBN EN ISO 3503 | Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending | - |
| NBN EN ISO 4288 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture | - |
| NBN EN ISO 527-1/2/3/4/5 | Plastics - Determination of tensile properties | Yes |
| NBN EN ISO 580 | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating | Yes |
| NBN EN ISO 6259-1/2/3 | Thermoplastics pipes - Determination of tensile properties | Yes |
| NBN EN ISO 6892-1 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature | Yes |
| NBN EN ISO 75 | Plastics - Determination of temperature of deflection under load | - |
| NBN EN ISO 868 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness | Yes |
| NBN EN ISO 9080 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | Yes |
| NBN EN ISO 9969 | Thermoplastics pipes - Determination of ring stiffness | Yes |
| NBN ISO 9852 | Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method | - |
| NBN T 41-006 | Kunststoffen - Genormaliseerde atmosferen voor het conditioneren en de proeven | - |
| NBN T 41-011 | Kunststoffen - Schedeldrukproef op ringen tussen twee evenwijdige platen | - |
| NBN T 42-010 | Polyethyleen (PE) leidingsystemen - Richtlijnen voor het uitvoeren van stuiklassen en elektrolassen | N/A |
| NBN T 42-011 | Polyethyleen (PE) leidingsystemen - Richtlijnen voor de opleiding; kwalificatie en herkeuring van lassers voor stuiklassen en elektrolassen | N/A |
| NBN T 42-104 (1989) | Kunststofleidingsystemen voor de drinkwatervoorziening - Polyethyleen (PE) - Deel 4 : Kranen | N/A |
| NBN T 42-105 | Kunststofleidingsystemen voor de drinkwatervoorziening; en voor de afvoer en riolering onder druk - Polyethyleen (PE) - Deel 2: Buizen | N/A |
| NBN T 42-106 | Buizen van polyethyleen voor de distributie van aardgas | N/A |
| NBN T 42-107 | PVC buizen voor binnenhuis- en regenwaterafvoerleidingen | - |
| NBN T 42-107 | PVC buizen voor binnenhuis- en regenwaterafvoerleidingen | - |
| NBN T 42-108 | PVC buizen voor rioleringen | - |
| NBN T 42-108 | PVC buizen voor rioleringen | - |
| NBN T 42-110 | PVC buizen voor industrieel gebruik | - |
| NBN T 42-110 | PVC buizen voor industrieel gebruik | - |
| NBN T 42-110 (1980) | PVC buizen voor industrieel gebruik | N/A |
| NBN T 42-111 | PVC buizen voor drinkwaterleidingen | - |
| NBN T 42-111 (1989) | PVC buizen voor drinkwaterleidingen | N/A |
| NBN T 42-112 | Afvoerbuizen van polyethyleen | - |
| NBN T 42-113 | Geribbelde draineerbuizen van niet-geplastificeerd PVC | Yes |
| NBN T 42-115 | Kunststofleidingsystemen - Infiltratie-transportriool (IT-riool) voor regenwater - Eisen en beproevingsmethoden | Yes |
| NBN T 42-402 (1978) | Kunststofbuizen en -koppelstukken - Bepaling van de afmetingen | Yes |
| NBN T 42-403 | Thermoplastische buizen - Bepalen van de slagvastheid bij 0C | - |
| NBN T 42-405 | Kunststofbuizen - Verwijdingsproef | - |
| NBN T 42-406 (1980) | Kunststofbuizen en -koppelstukken - Bepaling van de volumemassa | Yes |
| NBN T 42-409 | Verbindingen met elastische pakkingen voor PVC leidingen onder druk - Dichtheidsproef bij uitwendige druk | - |
| NBN T 42-601 | Kunststofleidingsystemen voor binnenrioleringen (lage en hoge temperatuur) - Ongeplasticeerd polyvinylchloride (PVC-U) - Deel 1 : Specificaties voor leidingen; hulpstukken en het systeem | - |
| NBN T 42-601 (1976) | Kunststofleidingsystemen voor binnenrioleringen (lage en hoge temperatuur) - Ongeplasticeerd polyvinylchloride (PVC-U) - Deel 1 : Specificaties voor leidingen; hulpstukken en het systeem | N/A |
| NBN T 42-602 | Koppelstukken van PVCC bestemd voor PVCC buizen voor de afvoer van afvalwaters op hoge temperatuur; de luchtverversing en het vervoer van warme lucht - Specificaties | - |
| NBN T 42-603 | Kunststofbuizen en -koppelstukken - Bepaling van de afmetingen | N/A |
| NBN T 42-603 | Kunststofbuizen en -koppelstukken - Bepaling van de afmetingen | - |
| NBN T 42-605 §4.4 | Kunststofleidingsystemen - Fabrieksmatig vervaardigde kunststof aansluitstukken voor aansluiting op betonnen rioleringselementen - Eisen en beproevingsmethoden | Yes |
| NBN T 42-901 | Kunststofkoppelstukken - Bepaling van de vormvastheid | - |
| NF 136 | Certification rules for the NF APE mark NF136 | N/A |
| NF E 29-196 | Tests for resistance to stress corrosion cracking in ammoniacal environment | |
| of copper alloy fitting parts dedicated to gas equipment | - | |
| NF T 54-969 | Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Electrofusion ancillaries — Safety time of the fusion cycle | Yes |
| NF T 54-970 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Electrofusion tapping tees - Design of tapping tees and leak flow rate for the cutter | - |
| NF T 54-972 | Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Valves - Leaktightness angular range and additional dimensional specifications | Yes |
| NF T 54-973 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves - Operating extensions and telescopic extensions for valves | - |
| PCF BCCA - Annex A; PE-X (2019) / PE-RT (2019) / Multilayer (2015) / PB (2019) / PP (2021) / PVC-C (2021) | Yes | |
| PTV 828 | Technische voorschriften voor Gras-/grindkunststofplaten | N/A |
| PTV 828 §4.6 | Technische voorschriften voor Gras-/grindkunststofplaten - §4.6 Treksterkte van de verbindingen | Yes |
| PTV 828 §4.7 | Technische voorschriften voor Gras-/grindkunststofplaten - §4.7 Druksterkte en vervorming | Yes |
| SROB100-NF | Robinets en alliage de cuivre de dn ≤ 50 utilises en amont des compteurs de gaz | - |